Secure your AM350 PRO display in a clear, easy-to-view position with the MTB02 suction cup mounting bracket. \n \nThe adjustable holder features a standard 1/4-inch mounting screw and a strong suction cup base for installation on clean windshields and other smooth surfaces. Its flexible angle adjustment helps you position the screen for comfortable viewing inside your RV, tow vehicle, truck, or camper. \n \n• Designed for the AM350 PRO display \n• Standard 1/4-inch mounting screw \n• Adjustable viewing angle \n• Strong suction cup base \n• Tool-free installation \n• Suitable for windshields and smooth dashboard surfaces

---

MTB02 Suction Cup Mounting Bracket for AM350 PRO Display

\n

The MTB02 AM350 PRO display mount provides a simple and adjustable way to position your leveling monitor inside an RV, tow vehicle, truck, or camper.

\n

Its strong suction cup base attaches to a clean windshield or another suitable smooth surface. Meanwhile, the adjustable arm and 1/4-inch mounting screw allow you to change the screen angle for clearer viewing.

\n

No drilling or permanent installation is required. As a result, you can install, remove, or reposition the display whenever needed.

\n \n

Designed for the AM350 PRO Display

\n

The MTB02 is designed as a mounting accessory for the dedicated display included with the AM350 PRO wireless RV leveling system.

\n

It helps keep the display:

\n \n

\n
• Easy to see from the driver’s seat
\n
• Securely positioned during campsite setup
\n
• Away from loose items on the dashboard
\n
• Available for quick pitch and roll checks
\n
• Positioned without occupying your smartphone holder
\n

\n

The bracket holds the display only. It does not include the AM350 PRO monitor, transmitter, or leveling system unless specifically stated in the package contents.

\n \n

Standard 1/4-Inch Mounting Screw

\n

The MTB02 uses a standard 1/4-inch threaded mounting screw to connect to the compatible display.

\n

To install the display:

\n \n

\n
1. Align the display mounting hole with the bracket screw.
\n
2. Turn the display or mounting screw until secure.
\n
3. Adjust the arm to the preferred viewing angle.
\n
4. Tighten the adjustment point before use.
\n

\n

Do not overtighten the screw, as excessive force may damage the display housing or mounting thread.

\n \n

Strong Suction Cup Base

\n

The suction cup base allows tool-free installation on suitable smooth surfaces.

\n

Recommended surfaces include:

\n \n

\n
• Vehicle windshields
\n
• Smooth glass
\n
• Smooth dashboard mounting plates
\n
• Flat, non-porous panels
\n
• Other clean and smooth surfaces
\n

\n

For the best grip, clean and dry the surface before installation.

\n

The suction cup may not attach securely to:

\n \n

\n
• Textured dashboards
\n
• Curved surfaces
\n
• Dusty or oily surfaces
\n
• Soft-touch materials
\n
• Fabric-covered panels
\n
• Rough or porous surfaces
\n

\n

If your dashboard is textured, install the bracket on the windshield or use a suitable smooth mounting plate.

\n \n

Adjustable Viewing Angle

\n

The adjustable joint lets you position the AM350 PRO display for a more comfortable viewing angle.

\n

You can tilt or rotate the holder to reduce:

\n \n

\n
• Screen glare
\n
• Awkward viewing angles
\n
• Reflections from the windshield
\n
• Obstruction of the original dashboard
\n
• The need to move the display by hand
\n

\n

After setting the angle, tighten the adjustment joint so the display remains stable.

\n \n

Tool-Free Installation

\n

The MTB02 does not normally require drilling, screws in the dashboard, or permanent adhesive.

\n

Basic installation steps:

\n \n

\n
1. Choose a suitable mounting position.
\n
2. Clean and dry the surface.
\n
3. Press the suction cup firmly against the surface.
\n
4. Lock the suction mechanism, if applicable.
\n
5. Attach the AM350 PRO display to the 1/4-inch screw.
\n
6. Adjust the display angle.
\n
7. Confirm that the bracket and screen are secure.
\n

\n

Check the mount before every trip or campsite setup.

\n \n

Easy to Remove and Reposition

\n

The suction cup design makes it easy to move the bracket between different locations or vehicles.

\n

For example, you can:

\n \n

\n
• Move it between an RV and tow vehicle
\n
• Reposition the display to reduce glare
\n
• Remove it during long-term storage
\n
• Take it down when parking in direct sunlight
\n
• Change the display position for another driver
\n

\n

Before moving the bracket, release the suction mechanism instead of pulling the arm forcefully.

\n \n

Suitable for RV and Vehicle Use

\n

The MTB02 can be used in many vehicle interiors, including:

\n \n

\n
• Travel trailers
\n
• Fifth wheels
\n
• Motorhomes
\n
• Camper vans
\n
• Pickup trucks
\n
• SUVs
\n
• Tow vehicles
\n
• Utility vehicles
\n

\n

Compatibility depends on the display’s mounting thread and the available installation surface.

\n \n

Safe Installation Position

\n

Install the bracket where the display remains easy to see without blocking the road.

\n

Do not install it:

\n \n

\n
• In the driver’s direct line of sight
\n
• Over an airbag cover
\n
• Where it blocks the windshield
\n
• Where it interferes with vehicle controls
\n
• Where the display could fall onto pedals
\n
• On a loose or unstable surface
\n

\n

After installation, gently test the bracket to confirm that the suction cup and display remain secure.

\n \n

Why Choose the MTB02?

\n

The MTB02 provides a practical mounting solution for AM350 PRO users who want a dedicated display in a clear and convenient position.

\n

It offers:

\n \n

\n
• Direct compatibility with the AM350 PRO display
\n
• Standard 1/4-inch mounting screw
\n
• Adjustable viewing angle
\n
• Strong suction cup mounting
\n
• No drilling on suitable surfaces
\n
• Quick removal and repositioning
\n
• Compact and portable design
\n
• Installation on windshields or smooth surfaces
\n

\n

For RV owners who frequently use the AM350 PRO from the driver’s seat, the MTB02 helps keep the display visible, organized, and ready for campsite leveling.